How do I resync my PlayStation controller?

Resync Your PlayStation Controller in 3 Simple Steps

Are you struggling to reconnect your PlayStation controller to your console? With these simple steps, you’ll be back in the game in no time!

Direct Answer to "How do I Resync my PlayStation Controller?"

If you’re facing difficulties in reconnecting your controller to your PS4 or PS4 Pro console, this step-by-step guide is for you. You might have lost connection with your controller for various reasons like battery drainage, technical glitch, or even if someone else uses your console before you do. However, you don’t have to worry anymore! Simply follow these straightforward steps:

Step 1: Identify the Connection Method

PS4 and PS4 Pro consoles come with various methods to connect your controllers, including Bluetooth, wireless, or wired connection. Knowing the correct method is essential to synchronize your controller properly.

For Bluetooth and Wireless Controllers

• Check if your controller is charged or connect it to your console via USB cable (if the charge is below 40%) to start the charging process.
• Ensure both devices (your controller and PS4) are connected to the same network and settings.
• On your console, navigate to Settings > Devices > Bluetooth Devices > and click Refresh Devices to re-sync the controller.
• Press the Share + PS Button for at least 5 seconds, until you see a red light pulsing in front of your controller (approximately 15 seconds). Release both buttons to restart the re-sync process.
• Wait patiently, as it may take about 20-30 seconds for your controller to register on the console’s settings.
• Once successfully synchronized, your controller light bar should light up accordingly with its pre-assigned blue, red, green, or pink color. Your controller should now connect successfully, as indicated on the console screen.

Step 2: Manual Disconnection (Optional but recommended)

Step 3: Re-pairing with your Controller

Immediately follow up Step 1 above for Wireless Controllers with Power Cycling in Step 1 or with Cable Disconnection or Controller Button Press Combinations (with Power OFF duration).
Keep in mind some scenarios with specific workarounds are:

Pairing Issue Workarounds**:

**Battery Issues


Let the charging continue for some extra minutes. Connect your wireless controller again or use an AC power outlet to fasten charging until it turns GREEN, usually 45 min, even faster charging takes advantage of both USBs 1:00. To fast track fast the initial and main charge at faster charge your PS, ensure a direct power for AC cable adapter to help complete this PSS Controller: Fast-charged to reach 20+ levels up.. After using cable pairing via direct to your wireless your controller back using Bluetooth once more using. For you

(If, your pairing Bluetooth issue resolved) pair issue resolves if your issues resolve resolve pairing by performing pairing button combinations.) Your Bluetooth or Wi ## Common Fixes for Specific Situations

) for additional information! To avoid and the process may be long wait before any of any battery issue can cause battery is and “ps” is not and, “div” that does
## Advanced Solution: How to Restart a PS Controller ## Controller Redlight Error? There’s often a confusion whether your PlayStation controller battery should be entirely drained in Step 3 or connected quickly using either PS button simultaneous keypress then immediately followed. It all depends your your PS Bluetooth and controller have to follow specific combinations by step your guide by clicking5 seconds, . Your controller with green to charge more; If and then let wait at Let it a a good amount then, as <